Dersin Kodu | Dersin Adı | Dersin Türü | Yıl | Yarıyıl | AKTS | SGMK2112015934 | Automatic Control | Seçmeli | 2 | 3 | 3 |
|
Dersin Seviyesi |
Ön Lisans |
Dersin Amacı |
To know basic principle of automatic control and automation systems on board. |
Dersi Veren Öğretim Görevlisi/Görevlileri |
Lecturer Cihan NACAK |
Öğrenme Çıktıları |
1 | Student knows basic of measuring and control systems. | 2 | Student knows tools of measuring and control systems. | 3 | Student knows remote control principles of marine engine systems. | 4 | | 5 | |
|
Öğrenim Türü |
Formal Education |
Dersin Ön Koşulu Olan Dersler |
None |
Ders İçin Önerilen Diğer Hususlar |
None |
Dersin İçeriği |
Fundamentals of control systems. Measurement and control. Measurement systems.
Control devices and sensors. Signal measurement. Amplifiers and noise reduction methods.
Engine room control applications. Main engine speed and load control. Auxiliary machines load control and synchronization.
Boiler level, combustion and steam pressure measurement and control.
Cooling water, lubricating oil, temperature and pressure controls. Separator control systems.
Pollution and salinity measurement and control. Tank level control systems.
Skavenc air burning control. Propeller and rudder machine controls.
Engine room alarm systems. Modeling of control systems.
Open loop control system. Closed loop control system.
PID control system. Gain settings. The control system input-output relations.
Control systems diagrams, transfer functions. Stability.
Monitoring of the control elements. Errors and failures.
Analog and digital control systems.
Digital control systems. Data functions and calculations.
|
Haftalık Ayrıntılı Ders İçeriği |
|
1 | Fundamentals of control systems. Measurement and control. Measurement systems. | | | 2 | Control devices and sensors. Signal measurement. Amplifiers and noise reduction methods. | | | 3 | Engine room control applications. Main engine speed and load control. Auxiliary machines load control and synchronization. | | | 4 | Boiler level, combustion and steam pressure measurement and control. | | | 5 | Cooling water, lubricating oil, temperature and pressure controls. Separator control systems. | | | 6 | Pollution and salinity measurement and control. Tank level control systems. | | | 7 | Skavenc air burning control. Propeller and rudder machine controls. | | | 8 | Engine room alarm systems. Modeling of control systems. | | | 9 | Open loop control system. Closed loop control system. | | | 10 | PID control system. Gain settings. The control system input-output relations. | | | 11 | Control systems diagrams, transfer functions. Stability. | | | 12 | Monitoring of the control elements. Errors and failures. | | | 13 | Analog and digital control systems. | | | 14 | Digital control systems. Data functions and calculations. | | | 15 | | | | 16 | | | |
|
Ders Kitabı / Malzemesi / Önerilen Kaynaklar |
1. Prof. Dr. A.T. Dinibütün, A. Kuzucu, “Otomatik Kontrol Temelleri”, 1995.
2. Prof. Dr. B.C. Kuo, ‘Automatic Control Systems’, 1991.
3. Doç. Dr. İ. Yüksel, ‘Otomatik Kontrol’, 1991
4. Course notes
|
Planlanan Öğrenme Aktiviteleri ve Metodları |
|
Değerlendirme | |
TOPLAM | 0 | |
TOPLAM | 0 | Yarıyıl (Yıl) İçi Etkinlikleri | 40 | Yarıyıl (Yıl) Sonu Etkinlikleri | 60 | TOPLAM | 100 |
| Dersin Sunulduğu Dil | Turkish | Staj Durumu | None |
|
İş Yükü Hesaplaması |
|
Midterm Examination | 1 | 1 | 1 |
Final Examination | 1 | 1 | 1 |
Attending Lectures | 14 | 3 | 42 |
Self Study | 14 | 2 | 28 |
Individual Study for Mid term Examination | 1 | 8 | 8 |
Individual Study for Final Examination | 1 | 10 | 10 |
|
Program ve Öğrenme Çıktıları İlişkisi |
ÖÇ1 | 5 | 5 | 5 | 4 | 4 | 4 | 5 | 5 | 5 | 4 | 5 | 5 | 5 | 5 | ÖÇ2 | 5 | 4 | 5 | 4 | 5 | 5 | 5 | 5 | 4 | 5 | 5 | 3 | 5 | 4 | ÖÇ3 | 5 | 4 | 5 | 4 | 5 | 5 | 4 | 4 | 4 | 4 | 4 | 4 | 5 | 5 | ÖÇ4 | | | | | | | | | | | | | | | ÖÇ5 | | | | | | | | | | | | | | |
|
* Katkı Düzeyi : 1 Çok düşük 2 Düşük 3 Orta 4 Yüksek 5 Çok yüksek |
|
|
Ordu University Rectorate Building ,Cumhuriyet Campus , Center / ORDU / TURKEY • Tel: +90 452 226 52 00
|